Boiler Installation Quote Deeside: Should Controls and Hot-Water Setup Be Part of the Price?

  • November 15, 2026

What should a boiler installation quote include? Learn how controls, hot-water setup, commissioning and extra work can affect the final price.

    Why you can trust our content

    At CafGas CIC, we know choosing a new boiler can feel overwhelming, especially with so much conflicting advice online. That’s why we focus on clear guidance, honest recommendations, and trusted expertise to help homeowners make informed decisions about their heating systems.

    • Qualified heating engineers with extensive experience in new boiler installations, servicing, and energy-efficient heating solutions
    • Practical insights gained from real customer installations, boiler upgrades, and ongoing system maintenance across local homes and properties
    • A customer-first approach focused on reliable workmanship, transparent advice, and helping you choose the right boiler for your property and budget

    A quotation should clearly state the boiler, controls, installation work, removal of the old appliance, commissioning and any additional components or work. It should also identify important exclusions where applicable.

    They should be clearly identified in the quotation. Ask which controls are included, whether installation and setup are covered and whether there are additional costs for upgrades.

    The boiler should be set up and commissioned correctly, while the installer should explain the main hot-water settings available on that particular model.

    Differences can result from the boiler specification, controls, installation requirements, pipework, flue work, additional components and the amount of work included in each quotation.

    Yes. If quick hot water is important to you, discuss it before installation. Pipework distance, flow rate, boiler settings and system design can all influence how quickly hot water reaches a tap.

    Getting a quotation for a new boiler can seem straightforward. You choose a boiler, receive a price and decide whether to proceed. However, the total figure can sometimes include more or less work than you initially expect.

    A useful boiler installation quote deeside homeowners can understand should make clear what is included, particularly when it comes to controls, hot-water settings, commissioning and any changes needed to complete the installation properly.

    This matters because two quotations with similar-looking totals may not actually cover the same work.

    If you are considering a new boiler in Deeside, CafGas CIC can help you understand what should be included in your quotation before you commit to the installation.

    What should a boiler installation quote include?

    A quotation should give you a reasonably clear picture of what you are paying for. The exact contents will depend on the property, existing heating system and proposed boiler, but a typical quotation may cover several elements.

    These can include:

    • Supply of the boiler
    • Boiler installation
    • Removal of the existing appliance
    • Disposal of the old boiler
    • Required pipework alterations
    • Flue installation or replacement
    • Heating controls
    • System filling and testing
    • Commissioning
    • Demonstration of the controls
    • Relevant installation paperwork
    • Warranty information

    Not every installation will require every item. The important point is that the quotation should make clear what applies to your particular project.

    If something is not included, it is better to know before the work starts rather than discovering an additional charge halfway through the installation.

    Should controls be included in the quoted price?

    This is one of the questions worth asking before accepting a quotation.

    A new boiler does not operate independently of the rest of the heating controls. Depending on the system, you may need a thermostat, programmer, programmable thermostat or compatible smart control.

    The control you choose can affect how easily you manage your heating and, in some cases, how you use different scheduling or hot-water functions.

    When reviewing boiler prices and installation, check whether the quotation identifies the exact controls being supplied.

    Rather than simply seeing "new thermostat" on a quotation, ask:

    • What type of thermostat is included?
    • Is installation included?
    • Is the control compatible with the proposed boiler?
    • Does it support the functions you want?
    • Will the installer configure it?
    • Will someone explain how to use it?

    This helps prevent confusion when comparing different quotations.

    Why does hot-water setup need to be considered?

    For a combi boiler, hot-water behaviour can depend on more than the appliance itself.

    There can be settings for hot-water temperature, Eco operation and preheat or comfort functions, depending on the model. The installer should make sure the system is configured appropriately and explain the main settings during the handover.

    The property itself also matters. If the bathroom or kitchen tap is some distance from the boiler, there may still be a short delay before hot water reaches the outlet.

    A quotation does not need to promise instant hot water. Instead, it should make clear what installation work is being proposed and what the homeowner can reasonably expect from the finished system.

    What can make one boiler quotation higher than another?

    A difference in price does not automatically mean one installer is charging too much or that another is offering a better deal.

    There can be genuine differences in the work required.

    For example, the final cost can be affected by:

    FactorWhy it may affect the quotation
    Boiler specificationDifferent models and outputs have different supply costs
    ControlsBasic and advanced controls have different prices
    Flue requirementsThe existing flue may need replacing or changing
    PipeworkAlterations may be required to suit the new installation
    Boiler locationAccess and installation complexity can vary
    Existing systemAdditional work may be needed to integrate the new boiler
    RemovalOld equipment may require removal and disposal
    CommissioningThe completed system needs to be checked and set up
    Additional componentsFilters, valves or other components may be appropriate depending on the system

    This is why looking only at the headline figure can give an incomplete picture.

    When comparing boiler prices and installation, make sure you are comparing quotations for broadly the same specification and scope of work.

    Does a boiler quotation need to include commissioning?

    Commissioning is an important part of completing a boiler installation.

    The boiler should not simply be connected and left running without the appropriate checks. The installer needs to ensure that the completed installation is operating correctly and that the controls and system are functioning as intended.

    The exact commissioning process varies according to the boiler and installation, but it can involve checks of the appliance, heating system, controls and operating conditions.

    Ask the installer:

    • Is commissioning included in the quotation?
    • Will the controls be tested?
    • Will the boiler settings be checked?
    • Will the system be demonstrated after installation?
    • Will I receive the relevant paperwork?

    These questions can help you understand what happens after the physical installation is complete.

    What should you ask about the hot-water settings?

    If you are having a combi boiler installed, ask the installer to explain the hot-water settings before they leave.

    Depending on the model, you may have options such as:

    • Hot-water temperature adjustment
    • Eco mode
    • Preheat or comfort mode
    • Timed hot-water functions
    • Smart control integration

    The correct setting depends on how your household uses hot water.

    For example, a household that regularly needs hot water at different times may use the boiler differently from someone who mainly uses hot water at predictable times.

    The important thing is not to assume that one setting is automatically right for everyone.

    A good handover should explain what the settings do, what the homeowner can safely adjust and when an engineer should be contacted instead.

    What is the difference between a quotation and an estimate?

    The terms quotation and estimate are sometimes used interchangeably, but they can mean different things in everyday business use.

    A quotation generally sets out a defined price for a defined scope of work. An estimate may be more approximate, particularly where the full requirements have not yet been established.

    If you are requesting a boiler installation quote deeside, ask whether the price is based on a specific assessment of your property and whether anything could cause it to change.

    Useful questions include:

    Is this the final quoted price? Ask what circumstances could result in an additional charge.

    What exactly is included? Request clarification on the boiler, controls, removal, installation and commissioning.

    Are there any exclusions? This can highlight work that may be charged separately.

    Has the property been assessed? A proper understanding of the existing system can make the quotation more useful.

    Could additional work be required? If so, ask how you would be informed before that work is carried out.

    Clear communication at this stage can reduce misunderstandings later.

    Are cheaper controls always a better way to reduce the price?

    Not necessarily.

    Controls should be selected according to how the household wants to operate the heating system. Saving money by choosing a very basic control may be reasonable for one household but unsuitable for another.

    For example, someone who wants simple manual control may have little need for advanced connectivity. Another homeowner may value programmable schedules or remote control.

    The question should therefore be whether the controls provide useful functionality for the household rather than whether they are simply the cheapest available option.

    The same principle applies to the boiler itself. Choosing a specification that suits the property’s requirements is generally more useful than paying extra for features that are unlikely to be used.

    What should you check before accepting a boiler quote?

    Before agreeing to the work, take a few minutes to read through the quotation carefully.

    A practical checklist includes:

    • Boiler manufacturer and model
    • Boiler output or specification
    • Type of controls
    • Installation location
    • Flue arrangements
    • Removal and disposal of the old boiler
    • Any pipework alterations
    • Additional components
    • Commissioning
    • Control setup
    • Demonstration and handover
    • Warranty information
    • Aftercare arrangements
    • Total price and any stated exclusions

    If something is unclear, ask.

    A professional installer should be able to explain the quotation in straightforward language rather than expecting you to understand every technical term.

    CafGas CIC can explain the proposed installation, controls and included work so homeowners can review a quotation with a clearer understanding of what they are paying for.

    Could the cheapest quotation become more expensive later?

    It can happen if quotations are based on different scopes of work.

    For example, imagine one quotation includes the boiler, standard controls, removal of the existing appliance and commissioning. Another quotation appears cheaper but does not clearly state whether certain components, control upgrades or additional installation work are included.

    The two figures are not necessarily directly comparable.

    This does not mean a lower quotation is automatically incomplete. It simply means you should establish what each price covers before deciding.

    A clear boiler installation quote deeside should help you identify the scope of work rather than leaving important details open to interpretation.

    Should hot-water performance be discussed before installation?

    Yes, particularly if hot-water waiting time is one of your concerns.

    If you have experienced slow hot water with your existing system, tell the installer before the new boiler is selected.

    The cause could involve:

    • Distance between the boiler and outlet
    • Pipework layout
    • Water flow rate
    • Boiler settings
    • Existing system configuration
    • The type of boiler being considered

    A new boiler may change some aspects of performance, but it cannot necessarily eliminate the physical distance water has to travel through the property’s pipework.

    Discussing your expectations beforehand gives the installer an opportunity to explain what the proposed system can realistically provide.

    What happens after the boiler is fitted?

    The handover should be treated as part of the installation experience rather than an afterthought.

    Once the boiler is running, you should know the basics of operating the system.

    Ask the installer to demonstrate:

    1. How to turn heating on and off.
    2. How to change the heating temperature.
    3. How to adjust hot-water temperature where applicable.
    4. How to use the thermostat or programmer.
    5. What the main boiler controls do.
    6. Whether Eco or Preheat functions are available.
    7. What the main display symbols mean.
    8. What to do if a fault code appears.
    9. Where the manufacturer’s instructions are kept.
    10. Who to contact if you need help.

    You do not need a technical lesson lasting an hour. A clear, practical explanation of the controls you will actually use can be far more valuable.

    How can you make a fair comparison between quotations?

    The simplest approach is to put the quotations side by side and compare the scope rather than the totals alone.

    Look at:

    Boiler: Are the proposed specifications genuinely comparable?

    Controls: Are the same type and level of controls included?

    Installation: Does each quotation cover the same physical work?

    Additional components: Are filters, valves or other necessary items included where applicable?

    Commissioning: Is testing and setup included?

    Handover: Will the installer explain the controls and settings?

    Aftercare: Do you know who to contact if you have questions later?

    Once these points are clear, the price becomes much more meaningful.

    You may find that two quotations that initially looked very different are actually closer than expected once everything is compared like for like.

    Related articles

    • Estimate Your Savings

    Which fuel powers your boiler?

    Mains Gas

    LPG

    At a glance

    A quotation should clearly state the boiler, controls, installation work, removal of the old appliance, commissioning and any additional components or work. It should also identify important exclusions where applicable.

    They should be clearly identified in the quotation. Ask which controls are included, whether installation and setup are covered and whether there are additional costs for upgrades.

    The boiler should be set up and commissioned correctly, while the installer should explain the main hot-water settings available on that particular model.

    Differences can result from the boiler specification, controls, installation requirements, pipework, flue work, additional components and the amount of work included in each quotation.

    Yes. If quick hot water is important to you, discuss it before installation. Pipework distance, flow rate, boiler settings and system design can all influence how quickly hot water reaches a tap.

    Getting a quotation for a new boiler can seem straightforward. You choose a boiler, receive a price and decide whether to proceed. However, the total figure can sometimes include more or less work than you initially expect.

    A useful boiler installation quote deeside homeowners can understand should make clear what is included, particularly when it comes to controls, hot-water settings, commissioning and any changes needed to complete the installation properly.

    This matters because two quotations with similar-looking totals may not actually cover the same work.

    If you are considering a new boiler in Deeside, CafGas CIC can help you understand what should be included in your quotation before you commit to the installation.

    What should a boiler installation quote include?

    A quotation should give you a reasonably clear picture of what you are paying for. The exact contents will depend on the property, existing heating system and proposed boiler, but a typical quotation may cover several elements.

    These can include:

    • Supply of the boiler
    • Boiler installation
    • Removal of the existing appliance
    • Disposal of the old boiler
    • Required pipework alterations
    • Flue installation or replacement
    • Heating controls
    • System filling and testing
    • Commissioning
    • Demonstration of the controls
    • Relevant installation paperwork
    • Warranty information

    Not every installation will require every item. The important point is that the quotation should make clear what applies to your particular project.

    If something is not included, it is better to know before the work starts rather than discovering an additional charge halfway through the installation.

    Should controls be included in the quoted price?

    This is one of the questions worth asking before accepting a quotation.

    A new boiler does not operate independently of the rest of the heating controls. Depending on the system, you may need a thermostat, programmer, programmable thermostat or compatible smart control.

    The control you choose can affect how easily you manage your heating and, in some cases, how you use different scheduling or hot-water functions.

    When reviewing boiler prices and installation, check whether the quotation identifies the exact controls being supplied.

    Rather than simply seeing "new thermostat" on a quotation, ask:

    • What type of thermostat is included?
    • Is installation included?
    • Is the control compatible with the proposed boiler?
    • Does it support the functions you want?
    • Will the installer configure it?
    • Will someone explain how to use it?

    This helps prevent confusion when comparing different quotations.

    Why does hot-water setup need to be considered?

    For a combi boiler, hot-water behaviour can depend on more than the appliance itself.

    There can be settings for hot-water temperature, Eco operation and preheat or comfort functions, depending on the model. The installer should make sure the system is configured appropriately and explain the main settings during the handover.

    The property itself also matters. If the bathroom or kitchen tap is some distance from the boiler, there may still be a short delay before hot water reaches the outlet.

    A quotation does not need to promise instant hot water. Instead, it should make clear what installation work is being proposed and what the homeowner can reasonably expect from the finished system.

    What can make one boiler quotation higher than another?

    A difference in price does not automatically mean one installer is charging too much or that another is offering a better deal.

    There can be genuine differences in the work required.

    For example, the final cost can be affected by:

    FactorWhy it may affect the quotation
    Boiler specificationDifferent models and outputs have different supply costs
    ControlsBasic and advanced controls have different prices
    Flue requirementsThe existing flue may need replacing or changing
    PipeworkAlterations may be required to suit the new installation
    Boiler locationAccess and installation complexity can vary
    Existing systemAdditional work may be needed to integrate the new boiler
    RemovalOld equipment may require removal and disposal
    CommissioningThe completed system needs to be checked and set up
    Additional componentsFilters, valves or other components may be appropriate depending on the system

    This is why looking only at the headline figure can give an incomplete picture.

    When comparing boiler prices and installation, make sure you are comparing quotations for broadly the same specification and scope of work.

    Does a boiler quotation need to include commissioning?

    Commissioning is an important part of completing a boiler installation.

    The boiler should not simply be connected and left running without the appropriate checks. The installer needs to ensure that the completed installation is operating correctly and that the controls and system are functioning as intended.

    The exact commissioning process varies according to the boiler and installation, but it can involve checks of the appliance, heating system, controls and operating conditions.

    Ask the installer:

    • Is commissioning included in the quotation?
    • Will the controls be tested?
    • Will the boiler settings be checked?
    • Will the system be demonstrated after installation?
    • Will I receive the relevant paperwork?

    These questions can help you understand what happens after the physical installation is complete.

    What should you ask about the hot-water settings?

    If you are having a combi boiler installed, ask the installer to explain the hot-water settings before they leave.

    Depending on the model, you may have options such as:

    • Hot-water temperature adjustment
    • Eco mode
    • Preheat or comfort mode
    • Timed hot-water functions
    • Smart control integration

    The correct setting depends on how your household uses hot water.

    For example, a household that regularly needs hot water at different times may use the boiler differently from someone who mainly uses hot water at predictable times.

    The important thing is not to assume that one setting is automatically right for everyone.

    A good handover should explain what the settings do, what the homeowner can safely adjust and when an engineer should be contacted instead.

    What is the difference between a quotation and an estimate?

    The terms quotation and estimate are sometimes used interchangeably, but they can mean different things in everyday business use.

    A quotation generally sets out a defined price for a defined scope of work. An estimate may be more approximate, particularly where the full requirements have not yet been established.

    If you are requesting a boiler installation quote deeside, ask whether the price is based on a specific assessment of your property and whether anything could cause it to change.

    Useful questions include:

    Is this the final quoted price? Ask what circumstances could result in an additional charge.

    What exactly is included? Request clarification on the boiler, controls, removal, installation and commissioning.

    Are there any exclusions? This can highlight work that may be charged separately.

    Has the property been assessed? A proper understanding of the existing system can make the quotation more useful.

    Could additional work be required? If so, ask how you would be informed before that work is carried out.

    Clear communication at this stage can reduce misunderstandings later.

    Are cheaper controls always a better way to reduce the price?

    Not necessarily.

    Controls should be selected according to how the household wants to operate the heating system. Saving money by choosing a very basic control may be reasonable for one household but unsuitable for another.

    For example, someone who wants simple manual control may have little need for advanced connectivity. Another homeowner may value programmable schedules or remote control.

    The question should therefore be whether the controls provide useful functionality for the household rather than whether they are simply the cheapest available option.

    The same principle applies to the boiler itself. Choosing a specification that suits the property’s requirements is generally more useful than paying extra for features that are unlikely to be used.

    What should you check before accepting a boiler quote?

    Before agreeing to the work, take a few minutes to read through the quotation carefully.

    A practical checklist includes:

    • Boiler manufacturer and model
    • Boiler output or specification
    • Type of controls
    • Installation location
    • Flue arrangements
    • Removal and disposal of the old boiler
    • Any pipework alterations
    • Additional components
    • Commissioning
    • Control setup
    • Demonstration and handover
    • Warranty information
    • Aftercare arrangements
    • Total price and any stated exclusions

    If something is unclear, ask.

    A professional installer should be able to explain the quotation in straightforward language rather than expecting you to understand every technical term.

    CafGas CIC can explain the proposed installation, controls and included work so homeowners can review a quotation with a clearer understanding of what they are paying for.

    Could the cheapest quotation become more expensive later?

    It can happen if quotations are based on different scopes of work.

    For example, imagine one quotation includes the boiler, standard controls, removal of the existing appliance and commissioning. Another quotation appears cheaper but does not clearly state whether certain components, control upgrades or additional installation work are included.

    The two figures are not necessarily directly comparable.

    This does not mean a lower quotation is automatically incomplete. It simply means you should establish what each price covers before deciding.

    A clear boiler installation quote deeside should help you identify the scope of work rather than leaving important details open to interpretation.

    Should hot-water performance be discussed before installation?

    Yes, particularly if hot-water waiting time is one of your concerns.

    If you have experienced slow hot water with your existing system, tell the installer before the new boiler is selected.

    The cause could involve:

    • Distance between the boiler and outlet
    • Pipework layout
    • Water flow rate
    • Boiler settings
    • Existing system configuration
    • The type of boiler being considered

    A new boiler may change some aspects of performance, but it cannot necessarily eliminate the physical distance water has to travel through the property’s pipework.

    Discussing your expectations beforehand gives the installer an opportunity to explain what the proposed system can realistically provide.

    What happens after the boiler is fitted?

    The handover should be treated as part of the installation experience rather than an afterthought.

    Once the boiler is running, you should know the basics of operating the system.

    Ask the installer to demonstrate:

    1. How to turn heating on and off.
    2. How to change the heating temperature.
    3. How to adjust hot-water temperature where applicable.
    4. How to use the thermostat or programmer.
    5. What the main boiler controls do.
    6. Whether Eco or Preheat functions are available.
    7. What the main display symbols mean.
    8. What to do if a fault code appears.
    9. Where the manufacturer’s instructions are kept.
    10. Who to contact if you need help.

    You do not need a technical lesson lasting an hour. A clear, practical explanation of the controls you will actually use can be far more valuable.

    How can you make a fair comparison between quotations?

    The simplest approach is to put the quotations side by side and compare the scope rather than the totals alone.

    Look at:

    Boiler: Are the proposed specifications genuinely comparable?

    Controls: Are the same type and level of controls included?

    Installation: Does each quotation cover the same physical work?

    Additional components: Are filters, valves or other necessary items included where applicable?

    Commissioning: Is testing and setup included?

    Handover: Will the installer explain the controls and settings?

    Aftercare: Do you know who to contact if you have questions later?

    Once these points are clear, the price becomes much more meaningful.

    You may find that two quotations that initially looked very different are actually closer than expected once everything is compared like for like.

    Related articles

    Which fuel powers your boiler?

    Mains Gas

    LPG